Often a stain on older cabinets can start to look dirty and grungy. In an attempt to freshen older cabinetry, customers often ask me what it would take to paint over the existing surface. Here is a step by step explanation of the process O’Connor’s Painting Service uses to paint cabinetry.
- Remove old hardware. Note: if customer wants to replace the old hardware with new, be sure to choose hardware that matches the existing screw holes to avoid a lot of putty work to fill existing holes.
- Sand cabinets well with very sandpaper to remove old varnish or polyurethane.
- Wipe the surface with mineral spirits then follow by also wiping the cabinets down with a cleaning solution such as 50% water and 50% ammonia.
- Apply one coat primer of Zinsser Cover Stain Oil. We normally paint the exterior of the cabinetry then both sides any doors.
- Apply two top coats of latex or oil semi-gloss paint, whichever color a homeowner picks. We suggest picking a Sherwin Williams or Benjamin Moore product that has a oil base finish for a harder surface.
The real key to success in painting cabinets is in the preparation. Sand extremely well with sandpaper and clean all surfaces using a clean cloth saturated with mineral spirits in order to remove all surface dirt, greasy spots and contamination. If the surface is excessively dirty, you may have to go over the areas multiple times with the mineral spirits and the 50/50 ammonia water mixture.
it was nice post and very good techniqe for painting.